Custom Mold Components Aluminum Die Casting Factory

Wire EDM Technology For Die Mold Components:

Wire cut Electrical Discharge Machining (WEDM), sometimes called wire cutting. Its basic working principle is to use a continuously moving thin metal wire (called electrode wire) as an electrode to perform pulse spark discharge on the workpiece to remove metal and cut it into shape.

Wire EDM technology is a kind of special processing, which is different from traditional processing technology, which requires mechanical force and mechanical energy to cut, and mainly uses electric energy to realize the processing of materials. Therefore, WEDM technology is not limited by material properties, can process any material with hardness, strength, and brittleness, and occupies a critical position in machining at the current stage.

Die Mold Components Specifications:

Die Mold Components Characteristic:

1. Wear resistance
When the blank is plastically deformed in the mold cavity, it both flows and slides along the surface of the cavity, causing severe friction between the surface of the cavity and the blank, resulting in the failure of the mold due to wear. Therefore, the wear resistance of the material is one of the most basic and important properties of the mold.
Hardness is the main factor affecting wear resistance. In general, the higher the hardness of the mold parts, the smaller the amount of wear and the better the wear resistance. In addition, wear resistance is also related to the type, quantity, shape, size and distribution of carbides in the material.

2. Strong toughness
Most of the working conditions of the mold are very bad, and some often bear a large impact load, which leads to brittle fractures. In order to prevent sudden brittle fracture of mold parts during operation, the mold must have high strength and toughness. The toughness of the mold mainly depends on the carbon content, grain size and organizational state of the material.

3. Fatigue fracture performance
During the working process of the mold, fatigue fracture is often caused by the long-term action of cyclic stress. Its forms include small-energy multiple impact fatigue fracture, tensile fatigue fracture, contact fatigue fracture and bending fatigue fracture. The fatigue fracture performance of the mold mainly depends on its strength, toughness, hardness, and the content of inclusions in the material.

4. High-temperature performance
When the working temperature of the mold is high, the hardness and strength will decrease, resulting in early wear of the mold or plastic deformation and failure. Therefore, the mold material should have high anti-tempering stability to ensure that the mold has high hardness and strength at working temperature.

5. Heat and cold fatigue resistance
Some molds are in a state of repeated heating and cooling during the working process, which causes the surface of the cavity to be subjected to tension, pressure and stress, causing surface cracking and peeling, increasing friction, hindering plastic deformation, and reducing dimensional accuracy, resulting in Mold failure. Hot and cold fatigue is one of the main forms of failure of hot work dies, and these dies should have high resistance to cold and heat fatigue.

6. Corrosion resistance
When some molds such as plastic molds are working, due to the presence of chlorine, fluorine and other elements in the plastic, strong corrosive gases such as HCI and HF are decomposed after heating, which erodes the surface of the mold cavity, increases its surface roughness, and aggravates wear failure.

Die Mold Components Factory Introduction:

Huishuo Co., Ltd. is located in Dongguan City, China, and has been committed to the design and manufacture of precision metal stamping dies and injection molds since 2009, including metal stamping and injection molding. In terms of progressive stamping dies, our products mainly involve precision terminals, connectors, contacts, clips, shrapnel, shells, shielding covers, etc. In metal stamping, there are many precision presses with tonnage ranging from 25T-160T, all of which are gantry high-speed machines. It can produce various coils and strips with a degree of 0.05-4.0mm. The stamping materials include cold-rolled steel, stainless steel, phosphor bronze, brass, red copper, beryllium copper, lead frame materials, etc. Regarding plastic injection molding production, we have many injection molding machines of various types between 50-160T, focusing on the production and processing of various plastic products.

Shenzhen Huishuo Precision Technology Co., Ltd. is a production-oriented enterprise with strong technical development capabilities. Founded in 2009, it is located in Chang'an Town, Dongguan, a major manufacturing town that enjoys the "Hometown of Chinese Molds".

The company mainly focuses on the design and manufacture of precision sheet metal progressive stamping die, deep drawing dies and plastic injection molds, production of metal stamping parts and plastic injection products, etc. The stamping products and molds include precision terminals, connectors, shrapnel, shells, shielding covers, etc. The workshop area is about 5,000 square meters, with about 100 employees, a professional design, development, and processing technical team, which can effectively ensure the delivery time and quality of molds, products, and a professional quality management team. Guaranteed customer needs.

The company adheres to the principle of "customer interests first", and strictly controls the quality; it has advanced "Waida" and "Wasino" optical curve grinding machines (P/G), Western Japan WEDM, Japan Sodick WEDM and spark machines, small grinder, engraving machine, fast wire, and a series of related auxiliary facilities, as well as a series of advanced testing instruments, such as Nikon projector, Ninkon altimeter, comparator, quadratic element, etc., can independently design and manufacture various high Difficult, high quality and high stability metal stamping dies.

In terms of metal stamping products, there are many precision punching machines with tonnage ranging from 25T-160T, all of which are gantry high-speed machines. It can produce all kinds of coils and strips with a degree of 0.05-4.0mm, and stamping materials include cold-rolled steel, stainless steel, phosphor bronze, brass, red copper, beryllium copper, and lead frame materials, etc.

In terms of plastic injection molding, we have multiple injection molding machines ranging from 50-160T, focusing on the production and processing of various types of connector plastic products.

We adhere to the business philosophy of "quality first, customer first, forges ahead". After more than ten years of unremitting efforts of all employees, we have won the high trust and support of our customers, and have established good cooperation with many well-known enterprises at home and abroad. relation. The products sell well in mainland China, Hong Kong and Taiwan, Southeast Asia and European and American markets. While continuously improving production efficiency and product quality, the company also continuously learns advanced enterprise management experience, strengthens enterprise management, and improves the quality of employees. The certification and implementation of the ISO9001:2008 international quality management system is a new starting point for the company. We are convinced that through the company's continuous improvement, continuous innovation and perfect service, Huishuo Precision Mould will become a model in the mould industry. Sincerely welcome people from all walks of life at home and abroad to come to draw samples, discuss cooperation, enhance friendship, and create a better tomorrow!