Custom Injection Mold Injection Parts Processing Factory

Custom Injection Mold Injection Parts Processing Factory

About Plastic Injection Molding

Injection molding is an injection-molding molding method. The advantages of the injection molding method are that the production speed is fast, the efficiency is high, the operation can be automated, there are many varieties of colors, the shape can be from simple to complex, and the size can be from large to small, and the size of the product is accurate, the product is easy to replace, and it can be formed into complex shapes. Parts, injection molding is suitable for mass production and complex shape products and other molding processing fields.

At a certain temperature, the completely molten plastic material is stirred by a screw, injected into the mold cavity with high pressure, and cooled and solidified to obtain a molded product. This method is suitable for the mass production of complex-shaped parts and is one of the important processing methods.

The injection molding process mainly includes 6 stages mold clamping - filling - pressure holding - cooling - mold opening - demoulding. These 6 stages directly determine the molding quality of the product, and these 6 stages are a complete continuous process.

Plastic Injection Molds Parameter:

Injection Molding Precautions

After the injection molding product is formed, the size fluctuation often occurs. To solve this problem, it is necessary to start from the source and manage the production and manufacturing process of the mold.

1. Control of Material Temperature

Different raw materials have corresponding temperature requirements. If the plastic material has poor fluidity, the temperature should be increased to control it within the optimal flow value range.

2. Control of Mold Temperature

Different injection products have different geometric shapes, sizes, and wall thickness ratios, and have different requirements for the cooling system, and the mold temperature controls the cooling time of the product to a large extent, so when the mold temperature changes, the shrinkage rate There will also be great changes, and when the mold temperature remains stable, the size of the injection molded product is more accurate, and there will be no defects such as deformation, poor gloss, and cooling spots. Therefore, relevant personnel should try to keep the mold at an allowable low temperature, which can not only shorten the injection cycle but also improve the efficiency of production management, so that the physical properties of the raw materials are in the best state. In addition, in the manufacturing process of injection molded products, the setting value of mold temperature should be within the recommended temperature range of raw materials, and cannot be changed arbitrarily.

3. Adjustment and Control of Pressure and Exhaust

When debugging the mold, the appropriate locking force and injection pressure should be determined to ensure that the air in the mold cavity, the core, and the gas generated by the plastic can be discharged out of the mold through the exhaust groove. It should be noted that if the exhaust is not smooth, there will be insufficient injection, resulting in weld lines or burns.

The above-mentioned molding defects sometimes appear in the same part. When the injection molding product is relatively thin and the mold temperature is relatively high, the product is easily burned, and the burnt part will appear with welding marks at the same time, which is the consequence of not paying attention to the exhaust groove. . In order to avoid burns, the depth of the exhaust shoulder should be designed to be deeper, and a larger ventilation groove should be opened at the rear of the shoulder so that the gas passing through the shoulder can be quickly discharged out of the mold. An exhaust slot should also be opened on the ejector rod to ensure that there is no flash.

4. Supplementary Shaping Control of Injection Molding Product's Size

After demolding, the injection-molded product will deform and warp to varying degrees with the change of temperature. At this time, some auxiliary fixtures can be used for adjustment, and remedial measures can be taken in time. When the product is cooled and solidified, a good adjustment effect can be achieved.

Finally, by strictly managing the entire injection molding process, the size of the injection-molded product will be ideally controlled to avoid large fluctuations in size.

​

Shenzhen Huishuo Precision Technology Co., Ltd. is a production-oriented enterprise with strong technical development capabilities. Founded in 2009, it is located in Chang'an Town, Dongguan, a major manufacturing town that enjoys the "Hometown of Chinese Molds".

The company mainly focuses on the design and manufacture of precision sheet metal progressive stamping die, deep drawing dies and plastic injection molds, production of metal stamping parts and plastic injection products, etc. The stamping products and molds include precision terminals, connectors, shrapnel, shells, shielding covers, etc. The workshop area is about 5,000 square meters, with about 100 employees, a professional design, development, and processing technical team, which can effectively ensure the delivery time and quality of molds, products, and a professional quality management team. Guaranteed customer needs.

The company adheres to the principle of "customer interests first", and strictly controls the quality; it has advanced "Waida" and "Wasino" optical curve grinding machines (P/G), Western Japan WEDM, Japan Sodick WEDM and spark machines, small grinder, engraving machine, fast wire, and a series of related auxiliary facilities, as well as a series of advanced testing instruments, such as Nikon projector, Ninkon altimeter, comparator, quadratic element, etc., can independently design and manufacture various high Difficult, high quality and high stability metal stamping dies.

In terms of metal stamping products, there are many precision punching machines with tonnage ranging from 25T-160T, all of which are gantry high-speed machines. It can produce all kinds of coils and strips with a degree of 0.05-4.0mm, and stamping materials include cold-rolled steel, stainless steel, phosphor bronze, brass, red copper, beryllium copper, and lead frame materials, etc.

In terms of plastic injection molding, we have multiple injection molding machines ranging from 50-160T, focusing on the production and processing of various types of connector plastic products.

We adhere to the business philosophy of "quality first, customer first, forges ahead". After more than ten years of unremitting efforts of all employees, we have won the high trust and support of our customers, and have established good cooperation with many well-known enterprises at home and abroad. relation. The products sell well in mainland China, Hong Kong and Taiwan, Southeast Asia and European and American markets. While continuously improving production efficiency and product quality, the company also continuously learns advanced enterprise management experience, strengthens enterprise management, and improves the quality of employees. The certification and implementation of the ISO9001:2008 international quality management system is a new starting point for the company. We are convinced that through the company's continuous improvement, continuous innovation and perfect service, Huishuo Precision Mould will become a model in the mould industry. Sincerely welcome people from all walks of life at home and abroad to come to draw samples, discuss cooperation, enhance friendship, and create a better tomorrow!